LCD Panel Cleaning Wipes

LCD Panel Cleaning Wipes

100% polyester, ultra-low particle LCD panel cleaning wipes for dust, oils, and residue removal on glass, TFT, and touch panels without scratching or linting.
Send Inquiry
Description

LCD Panel Cleaning Wipes | 100% Polyester Cleanroom Wipes

 

100% polyester, low-particle nonwoven wipes that lift dust, oils, and process residue from LCD, TFT, and touch-panel surfaces - without scratching glass or shedding fibers. Because of their sub-micron particle control, they're also known in the industry as Nano Scale Ultra Fine Cleanroom Wipes.

 

Key Featuresproduct-1448-1086

 

Ultra-low particle release - 124 particles ≥0.3μm per ft³, well under the ≤300 spec ceiling, so it won't redeposit debris on particle-sensitive panel surfaces.

1-second sorptive rate - picks up liquid almost instantly (spec ≤5 seconds), keeping wipe-down passes quick and consistent.

High sorbency - 2.43 ml/g intrinsic and 302 ml/m² extrinsic sorbency, both above spec, so fewer wipes are needed per panel.

Tight dimensional control - 225 × 225mm at 380μm thick, held to a tight tolerance for predictable coverage.

Durable 100% polyester weave - resists tearing and linting through repeated wiping.

Verified to IEST-RP-CC004.3 - every value below is measured against the industry-standard cleanroom wiper test method.

 

Specifications

 

Attribute

Value

Spec

Material composition

100% polyester

-

Size (L × W)

225 × 225 mm

228 mm ± 5%

Thickness

380 μm

350 μm ± 50

Basis weight

124 g/m²

120 g/m² ± 5%

Sorbency - intrinsic

2.43 ml/g

≥2.1 ml/g

Sorbency - extrinsic

302 ml/m²

≥280 ml/m²

Sorptive rate

1 second

≤5 seconds

Particle release (APC ≥0.3μm)

124 particles/ft³

≤300 particles/ft³

All values tested to IEST-RP-CC004.3, the IEST recommended practice for evaluating cleanroom wiping materials.

 

Applications

 

Nano Scale Ultra Fine Cleanroom Wipes like this one are used anywhere a panel or optical surface can't tolerate scratches or trapped particles:

Environment

Typical use

LCD / TFT / OLED panel lines

Removing dust, oils, and process residue from panel and glass surfaces before inspection or lamination

Touch panel & cover glass assembly

Pre-bond surface cleaning to keep particles from getting trapped under glass

FPD cleanrooms

Wiping down fixtures, jigs, and workstations between process steps

Optical components & lenses

Streak-free cleaning of lenses, prisms, and coated optics

Semiconductor & PCB cleanrooms

General tool and carrier wipe-down in particle-controlled areas

 

FAQ

 

Q: What are LCD Panel Cleaning Wipes made of?

A: 100% polyester nonwoven fabric - no wood pulp, so there's no cellulose fiber to shed onto the panel surface.

Q: What size is each wipe?

A: 225mm × 225mm (about 8.9 in × 8.9 in), 380μm thick.

Q: How much liquid does one wipe hold?

A: 2.43 ml/g intrinsic sorbency and 302 ml/m² extrinsic sorbency - both above the 2.1 ml/g and 280 ml/m² spec minimums.

Q: What's the difference between intrinsic and extrinsic sorbency?

A: Intrinsic sorbency (ml/g) is how much liquid the material itself can hold, independent of wipe size. Extrinsic sorbency (ml/m²) is the holding capacity of the actual wipe per unit of surface area - the number that predicts real wiping performance.

Q: What cleanroom class are these wipes suitable for?

A: At 124 particles ≥0.3μm released per ft³ (spec ≤300), they're commonly used in Class 100–1,000 (ISO 5–6) cleanrooms and similarly controlled environments.

Q: Are LCD Panel Cleaning Wipes anti-static or ESD-safe?

A: The standard wipe isn't rated for static-dissipative use. For static-sensitive lines, ask about Weston's ESD Cleanroom Wipes, built for controlled charge dissipation.

Q: Can they be used with IPA or other solvents?

A: Yes - they're used dry or pre-saturated with IPA and other cleanroom-compatible solvents for panel and glass cleaning.

Q: What standard verifies these specs?

A: IEST-RP-CC004.3, the IEST recommended practice for evaluating cleanroom wiping materials - it covers sorbency, sorptive rate, and particle release testing.

 

Hot Tags: lcd panel cleaning wipes, China lcd panel cleaning wipes manufacturers, suppliers, factory, cleanroom wipers, ESD Cleanroom Wipes, Heavy Weight Polyester Absorbent Cleanroom Wipes, Metal Fiber Cleanroom Wipes, Microfiber Cleanroom Wipes, Polyester Cleanroom Wipe

Send Inquiry